Plumbing is something that we all need a little bit of knowledge about. Calling in a plumber every time you have a small leak in your sink can be a bit too expensive for people.
Having a good set of plumbing tools can come in handy at a time like this.
If you are a plumber who is just getting started, you will also need a few basic tools in your bag. So here is a plumbing tools list that you can use to buy your first plumbing tool kit.
You can use this list as a basic guide and then add on tools that you think you need as you go on. With all the basic plumbing tools covered in this list, we doubt you will need to do that.
The Must-Have Plumbing Tools
You need a lot of tools for plumbing. But there are a set of plumbing tools that you just cannot do without. Here is a list of the tools that are a must-have in your plumbing tool bag.
1. Tongue And Groove Pliers
Tongue and groove pliers, also known as the slip-joint, channel-type, or channel lock pliers, are more of a new addition to the plumbing tools list. Earlier, plumbers used to carry a whole set of pliers of different sizes for different sized pipes.
The tongue and groove pliers are a tool that replaced that hassle. You still need pliers like that occasionally, but this is the tool that will get most of the job done.
Available with adjustment positions, the tongue and groove plier can be used with pipes of most sizes. It also has a long handle paired with an angled jaw that makes your work much easier.
Buying a standard 10-inch plier will get the job done, but we recommend buying just one or two more sizes if you are a professional.
Recommended Readings: Top 5 In-depth reviews of split ring pliers.
2. Pipe Wrench
You rarely see a pipe wrench in a plumbers bag nowadays. This is because there a lot of different tools that have replaced the need for a pipe wrench.
However, you still need a pipe wrench if you are working with galvanized steel or large threaded pipes. Other tools in the bathroom like a pressure regulator, water heater nipples, or yard hydrants also require the use of a pipe wrench.
When you’re working with such elements, you might find yourself in need of more than just one pipe wrench.
It is also a must-have for when you are cleaning out your main sewer or any big drain cleaning outfittings.
You can also use a pipe wrench to hold on to one fitting while you use another to turn any adjoining pieces.
That is why we recommend having a tool as such in your plumbing bag, although it is now not that much in use.
3. Adjustable Wrench
An adjustable wrench is also sometimes known as the Crescent wrench. But the name crescent is not a synonym for the adjustable wrench. Crescent is a brand that makes high-quality adjustable wrenches that are used by most plumbers; hence the tool is sometimes called by that name.
The main task that you use an adjustable wrench for is removing fixtures. You will need a tool of this caliber when removing fixtures from shutoff valves, faucets, supply tubes, or compression nuts.
Because the tool has a smooth jaw, it does no damage to the surface of your faucet or any chrome surface. You will find the tool quite helpful if you are a DIY enthusiast.
Buying just one adjustable wrench is an investment because the tool will last you a lifetime. If you are a professional or have different-sized pipes in your home, you could also invest in two or more adjustable wrenches.
4. Basin Wrench
The basin or sink wrench is a tool that you will need if you have fittings that are in a hard-to-reach place.
Most often, the tool is used while changing out old faucets. You use the long-handled tool to reach the fittings that are usually in a tight spot and cannot be reached. The long handle helps you get into that place and adjust the fittings.
The head of the tool is a pivoting head and is self-tightening. Besides using it when changing the faucet itself, you can also use the tool for making adjustments to the fittings.
5. Tubing Cutter
Now, you might have usually seen your father or grandpa cut the pipes for your kitchen or bathroom sink with a hacksaw. This is one of the most common ways people prefer cutting pipes.
While the method works, this procedure is not the best for cutting pipes neatly. You do not get a clean and plain edge which sometimes results in the pipes leaking.
We recommend using a hacksaw for this project only if you are sure you can get a cut that is clean and leveled.
Otherwise, the best thing to do is to get a tubing cutter. This tool is available in most hardware stores and is not that expensive either.
You can get different tubing cutters for the material your pipes are made of. For example, there are different tubing cutters for copper, steel, PVS plastic, or regular plastic.
A tubing cutter will just make your job much easier and flawless.
6. Compression Sleeve Puller
Most houses nowadays have compression sleeve fittings. It is a part that you for sure have if you have a PEX, CPVC, or copper tubing in your house. Most fixture shutoff valves have compression sleeve fittings as well.
Compression sleeves are attached to the fittings using a ring and a compression nut. This fitting is made as tight as possible to reduce the chances of leakage.
Sometimes you can remove this part using two wrenches. You hold the valve with a plier or a wrench and use another wrench to unscrew the nut. But this won’t work all the time as the nut is screwed in quite tight.
At most like so, we recommend you get your hands on a compression sleeve puller—a tool dedicated to this task only.
With a compression sleeve puller, you will be able to open this joint in a matter of seconds. A tool like this is also great as it does not damage the pipes at all.
Now, the plunger is a tool that almost everyone has at home. Whether you are a plumber or not, you have this tool at home for the occasional clogging you get.
You can use a plunger on a toilet, silt, or even a shower. This magic tool can be used to unclog any kind of pipe.
There are two kinds of plungers that are wildly available in any supermarket.
A. Rubber Plunger
This is the most common kind of plunger. Every household has one of these. It is a long stick that has a rubber cap on top of the head. You place the cup on any kind of draining spot and, with an up and down motion, clear out any clogging.
It is easy to use, cheap, and easily accessible.
B. Flange Plunger
The flange plunger has an extra flange part that goes down into the drainage system. Then, it helps push down anything that might be stuck in the way. These are also easily available in any shop but are not as popular as the rubber plunger.
Nowadays, you can get plungers that do both tasks at the same time. Meaning, there is a rubber cup and a flange on the top that helps clear clogs in pipes.
8. Drain Auger
We’ve talked about the plunger for when you have a clog in your drainage system. But what about when you get a clog that rubber or a flange plunger cannot get rid of?
That is when you need a drain auger by your side.
The more common name for this tool is the drain snake. It gets this name because of the long and lean structure that it is popular for.
A drain auger is a long coiled-metal that you push down the drain. The thing comes out from a circular drum or a handle that is angled. You rotate the device while the coil goes down the drain.
The coil then breaks down and removes any clogs that are getting in the way.
Besides your typical toolbox of screwdrivers and Allen wrenches, there are other types of equipment that you need for plumbing as well.
Now that you have a little plumbing tools list in your hand, you can go on and buy all your necessary tools in one go. There is no fear of missing out on a tool. All this equipment will help you fix whatever problem you are having in the plumbing sector for sure. So trust this list and get on to buying your tools.
Other articles that you may like:
- Ways to Prevent Tools from Rusting.
- How to organize your truck box?
- Top rated gift ideas for mechanics.
- Essential concrete tools list – Detailed guide.
- Hand Tools list – Screwdrivers, Wrenches, Sockets, Pliers, etc.
- Basic Drywall Tools You Should Know.
- Top Quality Matte or gloss finish food safe concrete countertop sealer.