How To Keep Tools From Rusting: Everything You Need to Know

Your tools are as precious as your jewels. These nifty devices must be protected at any cost. But is it possible to protect tools from a natural form of degradation like rusting?

The answer is yes. It is possible to safeguard tools from any natural process of damage, including rusting. Rusting may seem like an unavoidable situation, but you can work your way around it.

How To Keep Tools From Rusting?

All you have to do is follow some preventive measures. In this article, we have included some essential tips and tricks on how to keep tools from rusting. We believe you can easily combat rusting by following these pointers.

So what are you waiting for? Stop wasting time and jump right into it!

What Causes Tools To Rust?

Rusting is a chemical action that occurs in almost every object made of iron. When iron comes in contact with the moisture of the air, it reacts with the oxygen present in it and forms iron oxide, which is commonly known as rust.

Rust can appear on tools for a couple of reasons. Here are some of the most common reasons.

Dirt

Any tool that is dirty or unclean is likely to develop rust. However, the dirt should be moist or capable of absorbing moisture. A speck of dust will not necessarily cause rusting.

Humidity

Humidity is the main reason behind rusting of tools. If you do not control the temperature and humidity of the place where you keep your tools, they might develop rust.

Improper Maintenance

Any tool made of a natural element requires proper maintenance. Iron-made tools are no different. Improper maintenance is often the reason why tools end up getting rusted.

Ways to Keep Tools from Rusting – Step by Step Guide

Best Ways to Keep Tools from Rusting

Lucky for you, rusting of tools can be avoided by taking some simple preventive measures. Follow these simple steps to keep your tools clean and free from rust.

Step1: Clean Your Tools Regularly

The first and foremost condition to keep your tools free from rust or any other form of damage is to ensure that they are clean and dry. Compared to neat and polished tools, dirty and damp tools are more likely to get damaged.

Every time you use a specific tool, make sure you clean it afterward. Even if you don’t use a tool regularly, clean it from time to time.

Step2: Organize Tools Carefully

Surprisingly, you can save your tools from a lot of damage if you organize them properly. A simple trick to prevent rusting is to place the hand tools away from where the power tools are located.

Hand tools rust easily as they are lighter in composition. A small amount of damp dirt or dust can cause it to happen. Heavy tools easily collect a large amount of dust. If these two different tools are placed alongside, rusting will spread easily.

Step3: Prevent Ground Contact of Tools

Just like the placement of separate kinds of tools in separate places, it is important to keep your tools away from the ground. The floor attracts a lot of dirt and dust particles.

So, prevent the contact of tools with the ground. Instead, consider storing tools in shelves or boxes. Sometimes, you need to place power tools on the ground for a long time while working. In those instances, you can place a carpet or mat under the tool to avoid contact with the ground.

Step4: Keep the Humidity Under Control

Humidity is the main reason behind rusting of tools. The more you can avoid your tools from being exposed to air moisture, the more protected they will be.

Therefore, always ensure that the storage area of tools has a low amount of humidity. Make sure the tools are being exposed to fresh air more often. You can also use tools like ventilators to dehumidify the area.

Step5: Apply Protective Coating

This is a little extra measure you will have to take. Nonetheless, it is very effective. You can apply extra layers of protective oil coating on your tools. The idea here is to make the protective coating absorb any form of dust or dirt. In this way, the tool surface will remain unharmed.

Besides, you can use other moisture-absorbing agents like silica, salt, dry rice, etc., to ensure the protection of your tools. Just place these desiccants on your shelves or drawers, and they will do the rest of the job.

Live Rust-Free!

That was all we had for this one! Hope you learned a thing or two about rusting and the ways to prevent it. Now that you know how to keep tools from rusting, it is time for you to take matters into your hand.

It is not only inconvenient but also expensive to remove rust later, especially by a professional. So, try to prevent rusting as much as possible beforehand. Good luck!

Follow Our Other Tools Related Post:

Leave a Comment