Top 17 Concrete Tools Name List: Different Types & Their Uses

Concretes are integral to the foundation of every hardscaping project. And while they are extremely gratifying to work with, they can also be very unforgiving. Concretes set fast and hard, so unless you are quick on your feet and have the right tools at hand, every single pour can lead to a potential disaster.

Concrete Tools List

So, we decided to set out on a hunt for the proper tools and were completely stupefied at the number of choices available. But instead of getting overwhelmed and buying everything in sight, we decided to come up with our very own concrete tools list.

All the tools we have are essentials and are just what you need to get started.

List of Concrete Tools Names

An important thing to note before you make your purchases is to decide how you want to approach your concrete-related task. This could help you determine if you need any additional instruments other than the ones we have listed below.

1. Protective Gears

Raw concrete is made up of water, aggregates, and cement, which are caustic compounds and are detrimental to your skin. Using rubber gloves should keep you safe from possible concrete burns.

You also need to don eye and hearing protection as a safeguard against gravels, sands, or cement entering your eyes or loud sound exposure ruining your hearing. Breathing protection, such as masks, should also be used.

2. Rubber Boots

It is essential to stock up on good quality rubber boots that are not only resistant to chemicals but are also comfortable to wear. Workers must spend hours on their feet, and the right rubber boots would provide comfort while acting as protective gear as well. It also allows them to stand on concrete and work.

3. Mixers

If you have ever walked past a construction site, then there is no way you could have missed those giant mixers. They are a must-have appliance that decreases your workload and makes your work so much easier.

You can purchase portable mixers that are way smaller in size and are more convenient to move around. They are a little expensive but are worth the cost.

4. Saws

Saw is another tool that you should keep nearby before you start pouring and cutting concrete joints as you go. You should need concrete saws for demolition and getting rid of previous concretes, circular saws for slicing pieces for wood forms, and reciprocating saws for cutting metals.

5. Wheelbarrows

Wheelbarrows are great for transporting different tools and products around the site. You can also use them to mix small amounts of concrete for a sample test. You need to ensure that the wheelbarrows are sturdy enough to handle the heavy-duty tasks and abuse they would be put through.

6. Shovels

It is impossible to work without a shovel at a construction site. You need one to fill the gaps or depressions or the weird angles that are hard to reach. Shovels are also used to remove any excess concrete and to transfer them to and from wheelbarrows.

Concrete workers prefer using square-ended shovels, which are better for scooping rather than the rounded ones.

7. Screeds and Floats

A screed is used to level out the concrete right after you pour and remove any excess that you might have. It is basically a long and straight board used for scraping. You might have noticed that they come in different sizes for project-specific applications.

Having a commercial screed at your disposal is very helpful, but you can instead opt for a straight piece of lumber if you have a smaller job.

And if you still notice some voids, you should use bull floats or mag floats to pack them in. Floats are usually made of smooth metal or wooden surfaces to leave a smooth finish by lightly elevating the liquid cement.

8. Buckets

Concretes dry fast, so having a bucket and pail around can help a lot. You can add a little amount of water if you need to make your concrete easier to work with.

9. Digging Bar

Having a digging bar around is useful if you need a little leverage to lift small pieces besides boring through hard ground and widening your gaps.

10. Measuring Tape

Every DIY project needs precision and accuracy. However, when it comes to working with concrete, you need to be twice as careful when measuring.

Always keep a tape measure with you to measure slab depths and to have random checks to ensure you are going in the right direction and would not need to backtrack.

11. Laser Level

Laser levels are used to project a beam of light and maintain a straight level as you work. You especially need them to build platforms, such as a patio or a bridge. They remain true over a longer distance and will always stay out of your way.

12. Vibrators

After you pour and scrape your concrete smooth, you might notice some air pockets or bubbles in them. A vibrator would help you release them while also draining out any added water.

There are multiple options available, and you can choose one according to your preference and budget: internal, form, surface, and table. Each has a specific application, but all would contribute to making your foundation more solid.

14. Groove Cutters

Groovers are used where you can’t use saws and will allow you to create more precise control joints. While groovers have rounded sides for shaping the edges, there is also another tool available known as edger, which is used for more rounded-over outlines.

15. Finishing Trowel and Broom

You can use either of these appliances for the type of finishing you want. Run a trowel across the surface if you want it smooth. On the other hand, if you want a ground texture, use the broom, and drag it back and forth for a rougher outlook.

16. Pressure Washer

After you have finished your concrete project, it is time to add the last-minute touches and clean up the mess you have created. Using a pressure washer will remove all dirt and rubbish in mere minutes. And the best part about investing in one is that you can use it in all kinds of projects.

17. Concrete Polisher

This is the last step in a concrete job. It will make your surface look smooth and shiny and have that perfect finishing touch. You can even attempt to create an interesting pattern with a polisher.

Final Words

If you are planning on working with concretes in the future, take a quick look through this concrete tools list to ensure you have everything you might need. You mustn’t begin your work until you have them all.

Other tools posts:

Leave a Comment